Lunamoon Light Acrygel No. 63

LIQUID GEL LIGHT ACRYGEL

LIQUID GEL LIGHT ACRYGEL is an innovative material for reinforcing, leveling, and slightly extending nails.
It is a combination of Polygel and Base.

The formula consists of 60-80% acrylate copolymer (the main component of Polygel) and 20-30% HEMA (hydroxyethyl methacrylate), a main component of base products.
This allows this gel to completely replace the base.

FEATURES

• Polymerization wavelength: 365–405 nm

• Recommended lamp power: 36–48 W

• Recommended layer thickness:

  • Free edge: 0.5 mm

  • Apex: 1 mm

• Acid-free formula

• Medium consistency

• Medium pigmentation (covers the free nail edge)

• Full cure: 120 seconds

• Suitable for reinforcement and light extension

• Good shock absorption

• For reinforcement, the natural nail must be filed from the inside

• Requires a Rubber Base coat

• Can be gently heated to liquefy consistency

APPLICATION

REINFORCEMENT

• Remove old material

• Do not shorten the nail shape significantly, or leave approx. 2 mm length

• Mattify the nail surface with a 220 Grit file or 100 Grit buffer (without pressure)

• Perform manicure

• After using removers, wash hands with soap and water

• Degrease nails with Nail Prep LUNAmoon (2 passes)

• Primer optional

• Apply Rubber Base LUNAmoon as a base coat and cure for 60 seconds

• Remove inhibition layer

• Apply gel (cuticle distance 0.5–1 mm) and cure for 60 seconds

• File shape (for stable free edge)

Important:
For thin nails, file away approx. 1 mm of natural nail from the inside to prevent lifting.

• Remove inhibition layer

• Apply gel polish

• Seal with Top Coat and cure for 120 seconds

• Do not wipe after curing

CLASSIC NAIL EXTENSION

• Remove old material

• Shorten nail to approx. 1 mm and shape

• Prepare nail surface (220 Grit file or 100 Grit buffer)

• Perform manicure

• Degrease nails with Nail Prep LUNAmoon (2 passes)

• Apply Primer LUNAmoon

• Apply Rubber Base LUNAmoon as a base coat and cure for 60 seconds

• Remove inhibition layer

• Apply form

• Model free edge with clear gel and cure for 30 seconds

• File and clean shape

• Re-apply Rubber Base to treated areas and cure for 30 seconds

• Model build-up with gel and pinch after 10–15 seconds
  (for highly sticky or glittery gels: after 20 seconds)

• Fully cure for 120 seconds

• Remove inhibition layer

• Apply gel polish

• Seal with Top Coat and cure for 120 seconds

• Do not wipe after curing