Lunamoon Light Acrygel No. 65

LIQUID GEL LIGHT ACRYGEL

LIQUID GEL LIGHT ACRYGEL is an innovative material for nail strengthening, leveling, and light extension.
It is a combination of Polygel and Base.

The formula consists of 60–80% acrylate copolymer (the main component of Polygel) and 20–30% HEMA (hydroxyethyl methacrylate), a main component of base products.
This allows this gel to completely replace the base.

SPECIAL FEATURES

• Polymerization wavelength: 365–405 nm

• recommended lamp power: 36–48 W

• recommended layer thickness:

  • free edge: 0.5 mm

  • apex: 1 mm

• acid-free formula

• medium consistency

• medium pigmentation (covers the free nail edge)

• complete curing: 120 seconds

• suitable for strengthening and light extension

• good shock absorption

• for strengthening, the natural nail must be filed from the inside

• requires a Rubber Base coating

• can be gently heated to liquefy the consistency

APPLICATION

STRENGTHENING

• remove old material

• do not shorten nail form too much, or leave approx. 2 mm length

• mattify nail surface with 220 Grit file or 100 Grit buffer (without pressure)

• perform manicure

• after using removers, wash hands with soap and water

• degrease nails with Nail Prep LUNAmoon (2 passes)

• primer optional

• apply Rubber Base LUNAmoon as a base and cure for 60 seconds

• remove inhibition layer

• apply gel (distance to cuticle 0.5–1 mm) and cure for 60 seconds

• file shape (for stable free edge)

Important:
For thin nails, file approximately 1 mm of the natural nail from the inside to prevent lifting.

• remove inhibition layer

• apply gel polish

• seal with Top Coat and cure for 120 seconds

• do not wipe after curing

CLASSIC NAIL EXTENSION

• remove old material

• shorten nail to approx. 1 mm and shape

• prepare nail surface (220 Grit file or 100 Grit buffer)

• perform manicure

• degrease nails with Nail Prep LUNAmoon (2 passes)

• apply Primer LUNAmoon

• apply Rubber Base LUNAmoon as a base and cure for 60 seconds

• remove inhibition layer

• apply template

• model free edge with clear gel and cure for 30 seconds

• file and clean shape

• re-apply Rubber Base to treated areas and cure for 30 seconds

• model structure with gel and pinch after 10–15 seconds
  (for highly sticky or glitter gels: after 20 seconds)

• fully cure for 120 seconds

• remove inhibition layer

• apply gel polish

• seal with Top Coat and cure for 120 seconds

• do not wipe after curing