Lunamoon Light Acrygel No. 9 13ml

LIQUID GEL LIGHT ACRYGEL

LIQUID GEL LIGHT ACRYGEL is an innovative material for nail strengthening, leveling, and slight extension.
It is a combination of polygel and base.

The formula consists of 60–80% acrylate copolymer (the main component of polygel) and 20–30% HEMA (hydroxyethyl methacrylate), a key component of base products.
This allows this gel to completely replace the base coat.

FEATURES

• Polymerization wavelength: 365–405 nm

• Recommended lamp power: 36–48 W

• Recommended layer thickness:

  • Free edge: 0.5 mm

  • Apex: 1 mm

• Acid-free formula

• Medium consistency

• Medium pigmentation (covers the free nail edge)

• Full cure: 120 seconds

• Suitable for strengthening and slight extension

• Good shock absorption

• When strengthening, the natural nail must be filed from the inside

• Requires a Rubber Base coat

• Can be slightly warmed to liquefy consistency

APPLICATION

STRENGTHENING

• Remove old material

• Do not shorten nail shape significantly or leave approx. 2 mm length

• Mattify nail surface with 220 Grit file or 100 Grit buffer (without pressure)

• Perform manicure

• After using removers, wash hands with soap and water

• Degrease nails with Nail Prep LUNAmoon (2 passes)

• Primer optional

• Apply Rubber Base LUNAmoon as a base and cure for 60 seconds

• Remove inhibition layer

• Apply gel (0.5–1 mm distance from cuticle) and cure for 60 seconds

• File shape (for stable free edge)

Important:
For thin nails, file approximately 1 mm of the natural nail from the inside to prevent lifting.

• Remove inhibition layer

• Apply gel polish

• Seal with Top Coat and cure for 120 seconds

• Do not wipe after curing

CLASSIC NAIL EXTENSION

• Remove old material

• Shorten nail to approx. 1 mm and shape it

• Prepare nail surface (220 Grit file or 100 Grit buffer)

• Perform manicure

• Degrease nails with Nail Prep LUNAmoon (2 passes)

• Apply Primer LUNAmoon

• Apply Rubber Base LUNAmoon as a base and cure for 60 seconds

• Remove inhibition layer

• Apply form

• Model free edge with clear gel and cure for 30 seconds

• File and clean shape

• Reapply Rubber Base to treated areas and cure for 30 seconds

• Build with gel and pinch after 10–15 seconds
  (for highly sticky or glitter gels: after 20 seconds)

• Full cure for 120 seconds

• Remove inhibition layer

• Apply gel polish

• Seal with Top Coat and cure for 120 seconds

• Do not wipe after curing