Lunamoon Premium Gel No. 9

PREMIUM BUILDER GEL (CLASSIC)

PREMIUM BUILDER GEL is a light-curing polymer material for nail modeling, which, thanks to its high strength, allows for significant extension of the nail plate.

It contains photoinitiators that activate the polymerization process under UV/LED light with the appropriate wavelength.

SPECIAL FEATURES

• acid-free formula

• shock-absorbing – does not crack under stress

• medium consistency

• medium pigmentation (covers the free nail edge)

• suitable for the No-File Technique

• suitable for Upper Forms

• does not cause burning in the lamp

• becomes thicker in cold, more liquid in heat

• thixotropic (becomes more liquid during application)

• can be gently heated to liquefy the consistency

• stable at a layer thickness of 1 mm
  (slightly flexible at thinner layers, without affecting durability)

• no shrinkage, keeps the C-curve stable

• requires a Rubber Base coat

Technical data:

• Wavelength: 365–405 nm

• Lamp power: 36–48 W

• recommended layer thickness:

  • free edge: 0.5 mm

  • Apex: 1 mm

• full cure: 120 seconds

APPLICATION

REINFORCEMENT

• remove old material

• do not shorten nail form significantly or leave approx. 2 mm length

• mattify nail surface with 220 Grit File or 100 Grit Buffer

• perform manicure

• after using removers, wash hands with soap and water

• degrease nails with Nail Prep LUNAmoon (2 passes)

• primer optional

• apply Rubber Base LUNAmoon as a base coat and cure for 60 seconds

• remove inhibition layer

• apply gel (distance to cuticle 0.5–1 mm) and cure for 60 seconds

• file shape

Important:
For thin nails, file out approx. 1 mm of natural nail from the inside to avoid lifting.

• remove inhibition layer

• apply gel polish

• seal with Top Coat and cure for 120 seconds

• do not wipe after curing

CLASSIC NAIL EXTENSION

• remove old material

• shorten nail to approx. 1 mm and shape

• prepare nail surface (220 Grit File or 100 Grit Buffer)

• perform manicure

• degrease nails with Nail Prep LUNAmoon (2 passes)

• apply Primer LUNAmoon

• apply Rubber Base LUNAmoon as a base coat and cure for 60 seconds

• remove inhibition layer

• apply form

• model free edge with clear gel and cure for 30 seconds

• file and clean shape

• reapply Rubber Base to worked areas and cure for 30 seconds

• model overlay and pinch after 10–15 seconds
  (for very sticky or glitter gels: after 20 seconds)

• fully cure for 120 seconds

• remove inhibition layer

• apply gel polish

• seal with Top Coat and cure for 120 seconds

• do not wipe after curing