NAILSOFTHEDAY Cold Builder Gel 01 – milky pink builder gel for nail extension.

LOW TEMPERATURE – Low-temperature formula with reduced heat effect.
LIGHT PIGMENT – light pigmentation, ideal for a natural modeling result.

Consistency: 3.5 / Hardness: 4.5
Slightly reduced viscosity, strength with a focus on elasticity. Holds length well: medium length with thin application, and longer nails in a 1:1 ratio to the natural nail length with increased layer thickness (maximum value on the scale = 5).
Elastic in a thin layer for reinforcement, stable in thickness for extensions.

NAILSOFTHEDAY Cold Builder Gel LOW TEMPERATURE / LIGHT PIGMENT – a new series of lightly pigmented builder gels with reduced heat effect.
Its light pigmentation ensures a natural look for sculpted nails. The low-temperature formula provides pleasant comfort during application, even for weakened or damaged nails prone to heat sensitivity.
This gel can be used without reducing lamp power.

Advantages:
— elastic in a thin layer for reinforcement, stable in thickness for extensions;
— low-temperature formula with reduced heat effect: no strong burning, only slight warmth in the first seconds of polymerization;
— light pigmentation (ideal for natural designs);
— medium-fluid, viscous consistency – comfortable for reinforcement, correction, and extension;
— self-leveling, does not run into the side walls or under the cuticles;
— does not crack even with full bending – ideal for thin and weakened nails;
— reliably maintains the C-curve;
— high strength already at 1 mm layer – ideal for long shapes and stable corners;
— fast polymerization start: begins to cure from the 5th second;
— C-curve shaping after 10–15 seconds;
— fully cures even with layer thicknesses up to 3 mm;
— does not shrink;
— easy to file;
— does not yellow during polymerization.

Application:

1. Degrease the nail plate with Nailsoftheday Nail Prep.

2. Apply Nailsoftheday Dehydrator.

3. Apply Nailsoftheday Ultrabond.

4. Apply an elastic base coat with Nailsoftheday Rubber Base, Nailsoftheday Scotch Base, or Nailsoftheday Builder Base.

5. Evenly distribute the Builder Gel and level the surface.

6. Seal with a top coat: Nailsoftheday Universal Top, Nailsoftheday Glossy Top No Wipe, Nailsoftheday No Stress Top No Wipe (Anti-Scratch), Nailsoftheday Glossy Top Wipe, or matte with Nailsoftheday Teddy Top Wipe or Nailsoftheday Matte Top No Wipe.

Curing:
UV – 120 seconds
LED – 60 seconds

Warning:
Avoid contact with skin. Use only as directed. Keep out of sunlight and out of reach of children.