The KRYPTON II XPS-350 milling machine with 70 watts and 35,000 rpm for manicures and pedicures.

The most powerful model on the beauty market – the professional milling machine KRYPTON II

The improved milling machine model, refined down to the smallest detail, makes the nail technician's work more comfortable and productive.

The high power of 70 watts and a speed of 35,000 rpm allow for easy and effective performance of hardware manicures and pedicures. The device is very comfortable and ergonomic. It boasts the highest power among professional milling machines.

The handpiece micromotor operates smoothly and completely without vibration.
It is equipped with a user-friendly mechanism for changing bits. The clamping device securely fixes the bit and is centrally located on the housing, preventing unintentional opening during operation.

The particularly compact control unit takes up little space on the workbench compared to similar models.

The stylish, improved design of the device features a modern LED display that shows the current speed and operating mode.
All controls (forward/reverse, foot control, speed regulation) are now directly in the user's line of sight – no more annoying searching on the side of the device.

The number of bit holders on the housing has been increased, so all necessary bits are always at hand.

The handpiece holder is now positioned at a special angle, which prevents the bit from touching the table. Regardless of the length or size of the bit, your workspace remains protected.

Main advantages:

• Compact and portable control unit

• Stepless speed regulation

• LED display showing current speed and operating mode

• Intelligent electronic switching FW/REW during operation

• Improved foot pedal control

• Long operation without noise, vibration, and overheating

• Improved overload protection

• Handpiece cooling

Scope of delivery:

• Power supply

• Handpiece micromotor

• Foot pedal

• Handpiece holder

• Operating instructions

• Warranty card

• Warning notice

KRYPTON II is equipped with three innovative functions that will revolutionize the work of every professional and, above all, make it more comfortable and faster.

Function "EASY CONTROL" – intelligent electronic switching of forward/reverse during operation.
While working with the Krypton II, simply press the button to change the direction of the bit, and the processor automatically takes care of the rest.
This function not only saves time for you and your clients but also significantly reduces the risk of device damage. Simply put: you switch from a manual transmission to an automatic transmission.

Function "FREE FOOT"
With most milling machines, the handpiece only works when the pedal is continuously pressed, which constantly strains the foot. The pedal system has been modernized in the Krypton II.
Now the pedal serves as a pause function. In foot control mode, you set the desired speed, press the pedal once, and continue working comfortably. For a pause, another click on the pedal is sufficient. When pressed again, the milling machine continues to operate with the previously set parameters – this saves valuable time once again.

Function "PROTECTION+" – overload protection
This well-known function has been further developed and improved.

It protects the device from overload and prevents damage if the bit is not correctly inserted or the device is started without an inserted bit. After 3–5 seconds, an audible signal sounds, the error code E4 appears on the display, and the device is automatically locked to prevent damage to the micromotor or chuck.

This function is also helpful if the size of the bit does not match the set speed. For example, if you work for a long time with a heavy bit or pododisk at high speed, the device automatically detects the overload, displays an error message, and stops operation.
All you have to do is take a short break and restart the device.

Warranty: 24 months

The product is certified in Ukraine and EU countries!